| Product Image |
Item Name |
Price- |
 |
Charging cable for new UMX Beast batteries Charge up to EIGHT stock batteries in PARALLEL with YOUR charger This is eight Charger/Plane Sides with... |
$23.99
Add:
|
 |
Charging cable for new UMX Beast batteries Charge up to EIGHT stock batteries in PARALLEL with YOUR charger This is eight Charger/Plane Sides with... |
$20.99
Add:
|
 |
Charging cable for new UMX Beast batteries Charge up to EIGHT stock batteries in PARALLEL with YOUR charger This is eight Charger/Plane Sides with... |
$19.99
Add:
|
 |
Charging cable for new UMX Beast batteries Charge up to FOUR stock batteries in PARALLEL with YOUR charger This is four Charger/Plane Sides with... |
$19.59
Add:
|
 |
Charging cable for new UMX Beast batteries Charge up to FOUR stock batteries in PARALLEL with YOUR charger This is four Charger/Plane Sides with... |
$16.99
Add:
|
 |
Charging cable for new UMX Beast batteries Charge FOUR stock batteries in PARALLEL with YOUR charger This is four Charger/Plane Sides with ~4" of 28... |
$15.99
Add:
|
 |
Supercharge your custom high-speed plane!!! This is the JST male connector wired to FOUR (serial) 1S Lipo Female connectors. I have no idea why... |
$10.99
Add:
|
 |
Charging cable for new UMX Beast batteries Charge TWO stock batteries in PARALLEL with YOUR charger This is two Charger/Plane Sides with 2.5" of 28... |
$9.99
Add:
|
 |
Supercharge your Beast 3D!!! This is the Beast male connector wired to THREE (serial) MCP-X Lipo Female connectors. WARNING - Your... |
$9.99
Add:
|
 |
Charging cable for new UMX Beast battery, WITH banana jacks Charge that stock Beast battery with YOUR charger This is the Charger/Plane Side with... |
$8.99
Add:
|
 |
Supercharge your Beast 3D!!! This is the Beast male connector wired to THREE (serial) 1S Lipo Female connectors. WARNING - Your... |
$8.99
Add:
|
 |
Charging cable for new UMX Beast batteries Charge TWO stock batteries in PARALLEL with YOUR charger This is two Charger/Plane Sides with 2.5" of 28... |
$7.99
Add:
|
 |
Use your MCP Lipos on your Beast!!! This is the Beast male connector wired to two (serial) MCP-X Female connectors Plug in two of your existing MCP... |
$7.89
Add:
|
 |
Charging cable for new UMX Beast batteries Charge TWO stock batteries in PARALLEL with YOUR charger This is two Charger/Plane Sides with 2.5" of 28... |
$6.99
Add:
|
 |
Use your 1S Lipos on your Beast!!! This is the Beast male connector wired to two (serial) 1S Lipo Female connectors. Plug in two of your existing... |
$6.89
Add:
|
 |
Use your existing 2S Lipos on your minideans connected ESC This is the Beast female connector wired to a minideans clone, with the positive part of... |
$6.79
Add:
|
 |
This is the Beast male connector wired to two parallel Beast Female connectors Charge OR USE two of your Beast lipos at once! With two of these and... |
$6.79
Add:
|
 |
Use your existing Beast Lipos on other 2S planes This is the Beast female connector wired to a "JST" male connector Note - make sure the polarity of... |
$6.39
Add:
|
 |
New 1S parallel battery harness Use ONE of your existing 1S lipos to drive two devices. Regular 1S lipo connections on all sides, One female, two... |
$5.99
Add:
|
 |
New 1S parallel battery harness Use two of your existing 1S lipos in PARALLEL for more power. Regular 1S lipo connections (molex picoblade, 1.25mm... |
$5.99
Add:
|
 |
Use your existing 2S Lipos on your minideans connected ESC This is the Beast female connector wired to a minideans clone, with the positive part of... |
$5.99
Add:
|
 |
Use your existing 2S Lipos on your Beast This is the Beast male connector wired to a "JST" female connector Note - make sure the polarity of your... |
$5.99
Add:
|
 |
Adapt just about ANY small 2S battery for use in your Beast or Blade 130X! If your small 2S batteries have the Align style balance taps (by far the... |
$5.99
... more info
|
 |
2-pin female housing with 6" of 26 gauge wire, and banana connectors This is the Charger/RX connector on the popular DX7, DX7S, and DX8 Transmitters,... |
$5.99
Add:
|
 |
Use your existing 2S Lipos on your minideans connected ESC This is the "JST" female connector wired to a minideans clone, with the negative part of... |
$5.99
Add:
|
 |
Use your existing 2S Lipos on your minideans connected ESC This is the "JST" female connector wired to a minideans clone, with the positive part of... |
$5.99
Add:
|
 |
Use your existing JST-connected Lipos on your Umx planes! This is the familiar red JST-RCY female connector (male pins but female housing) wired to a... |
$5.99
Add:
|
 |
The ubiquitous little red JST connector! Female side with ~6" of 22 gauge wire and banana jacks This is generally on the RX or charger side - but be... |
$5.99
Add:
|
 |
Unique battery adapter Use two standard 1S lipo batteries in series to an ESC that has a standard red JST/BEC plug. One red male JST/BEC connector to... |
$5.99
Add:
|
 |
Charging cable for new UMX Beast battery Charge that stock battery with YOUR charger This is the Charger/Plane Side (JST-PH Female) with ~3" of 28... |
$5.09
Add:
|
 |
Charging cable for new UMX Beast battery Charge that stock Beast battery with YOUR charger This is the Charger/Plane Side with 2.5" of 28 gauge... |
$5.09
Add:
|
 |
Charge your 1S Lipos directly from your balance connector (if your charger does this) or balance them with an external balancer. This is the JST-XH... |
$5.00
Add:
|
 |
The ubiquitous little red JST connector! Extension - male and female with 26 gauge wire MAKE SURE TO SELECT LENGTH BELOW |
$4.99
... more info
|
 |
Use your MCP-X Lipos on your Mosquito, MCX, MCX-2, 4-Site or any other regular 1S lipo plane or heli This is the MCP female connector wired to ONE 1S... |
$4.99
... more info
|
 |
Banana Jack pair (male) 5" of 26 gauge wire attached. Due to the long plastic handle, useful wire length is 4" |
$4.79
Add:
|
