Product Image |
Item Name |
Price+ |
|
2-pin female housing with 3" of 26 gauge wire This is the Charger/RX connector on the popular DX7, DX7S, and DX8 Transmitters, and many other... |
$2.89
Add:
|
|
Battery connector that mates to the new UMX Beast battery Now make up your own charger solution to charge the stock battery This is the Charger/Plane... |
$2.99
Add:
|
|
2-pin female housing with 6" of 26 gauge wire This is the Charger/RX connector on the popular DX7, DX7S, and DX8 Transmitters, and many other... |
$2.99
Add:
|
|
The ubiquitous little red JST connector! Female side with ~4" of 22 gauge wire This is generally on the RX or charger side - but be certain to check... |
$2.99
Add:
|
|
The ubiquitous little red JST connector! Male side with ~4" of 22 gauge wire This is generally on the Battery side - but be certain to check your... |
$2.99
Add:
|
|
Battery connector that mates to the new UMX Beast battery Now make up your own charger solution to charge the stock battery This is the Charger/Plane... |
$3.09
Add:
|
|
Battery connector that mates to the new UMX Beast battery Now make up your own charger solution to charge the stock battery This is the Charger/Plane... |
$3.19
Add:
|
|
Battery connector that mates to the new UMX Beast battery Now make up your own charger solution to charge the stock battery This is the Charger/Plane... |
$3.29
Add:
|
|
Battery connector w/wires for the new UMX Beast 2S lipos Now make up your own packs to use in your Beast This is the BATTERY Side, with 6" of 28... |
$3.29
Add:
|
|
Battery connector w/wires for the new UMX Beast 2S lipos Now make up your own packs to use in your Beast This is the BATTERY Side, with 6" of 26... |
$3.59
Add:
|
|
4 inch extension for 1S lipos Use this to plug your big (fat) Parkzone Mosquito battery into your existing Parkzone charger, which was made for those... |
$4.19
Add:
|
|
Converter to allow you to plug a JST-connected lipo into a standard Receiver JST-RCY Female one one end, standard servo on the other NOTE - USE AT... |
$4.19
Add:
|
|
Converter to allow you to plug a standard 1S lipo into a standard Receiver 2-pin Molex Picoblade female one one end, standard servo on the other NOTE... |
$4.19
Add:
|
|
Banana Jack pair (male) 5" of 26 gauge wire attached. Due to the long plastic handle, useful wire length is 4" |
$4.79
Add:
|
|
Use your 2S Lipos on your Beast!!! This is the Beast male connector wired to a Mini-Deans-Clone connector Use this converter ONLY if your Mini-Deans... |
$4.79
Add:
|
|
Use your 2S Lipos on your Beast!!! This is the Beast male connector wired to a Mini-Deans-Clone connector Use this converter ONLY if your Mini-Deans... |
$4.79
Add:
|
|
The ubiquitous little red JST connector! Extension - male and female with 26 gauge wire MAKE SURE TO SELECT LENGTH BELOW |
$4.99
... more info
|
|
Use your MCP-X Lipos on your Mosquito, MCX, MCX-2, 4-Site or any other regular 1S lipo plane or heli This is the MCP female connector wired to ONE 1S... |
$4.99
... more info
|
|
Charge your 1S Lipos directly from your balance connector (if your charger does this) or balance them with an external balancer. This is the JST-XH... |
$5.00
Add:
|
|
Charging cable for new UMX Beast battery Charge that stock battery with YOUR charger This is the Charger/Plane Side (JST-PH Female) with ~3" of 28... |
$5.09
Add:
|
|
Charging cable for new UMX Beast battery Charge that stock Beast battery with YOUR charger This is the Charger/Plane Side with 2.5" of 28 gauge... |
$5.09
Add:
|
|
New 1S parallel battery harness Use ONE of your existing 1S lipos to drive two devices. Regular 1S lipo connections on all sides, One female, two... |
$5.99
Add:
|
|
New 1S parallel battery harness Use two of your existing 1S lipos in PARALLEL for more power. Regular 1S lipo connections (molex picoblade, 1.25mm... |
$5.99
Add:
|
|
Use your existing 2S Lipos on your minideans connected ESC This is the Beast female connector wired to a minideans clone, with the positive part of... |
$5.99
Add:
|
|
Use your existing 2S Lipos on your Beast This is the Beast male connector wired to a "JST" female connector Note - make sure the polarity of your... |
$5.99
Add:
|
|
Adapt just about ANY small 2S battery for use in your Beast or Blade 130X! If your small 2S batteries have the Align style balance taps (by far the... |
$5.99
... more info
|
|
2-pin female housing with 6" of 26 gauge wire, and banana connectors This is the Charger/RX connector on the popular DX7, DX7S, and DX8 Transmitters,... |
$5.99
Add:
|
|
Use your existing 2S Lipos on your minideans connected ESC This is the "JST" female connector wired to a minideans clone, with the negative part of... |
$5.99
Add:
|
|
Use your existing 2S Lipos on your minideans connected ESC This is the "JST" female connector wired to a minideans clone, with the positive part of... |
$5.99
Add:
|
|
Use your existing JST-connected Lipos on your Umx planes! This is the familiar red JST-RCY female connector (male pins but female housing) wired to a... |
$5.99
Add:
|
|
The ubiquitous little red JST connector! Female side with ~6" of 22 gauge wire and banana jacks This is generally on the RX or charger side - but be... |
$5.99
Add:
|
|
Unique battery adapter Use two standard 1S lipo batteries in series to an ESC that has a standard red JST/BEC plug. One red male JST/BEC connector to... |
$5.99
Add:
|
|
Use your existing Beast Lipos on other 2S planes This is the Beast female connector wired to a "JST" male connector Note - make sure the polarity of... |
$6.39
Add:
|
|
Use your existing 2S Lipos on your minideans connected ESC This is the Beast female connector wired to a minideans clone, with the positive part of... |
$6.79
Add:
|
|
This is the Beast male connector wired to two parallel Beast Female connectors Charge OR USE two of your Beast lipos at once! With two of these and... |
$6.79
Add:
|