| Product Image |
Item Name- |
Price |
 |
4 inch extension for 1S lipos Use this to plug your big (fat) Parkzone Mosquito battery into your existing Parkzone charger, which was made for those... |
$4.19
Add:
|
 |
2mm pitch pin/socket Female connector (XP-3A ESC input) TO .050 pitch male AR6400 motor connector (male) BE SURE TO CHOOSE YOUR DESIRED LENGTH BELOW... |
$8.39
... more info
|
 |
2mm pitch pin/socket Female connector (XP-3A ESC input) TO .050 pitch male AR6400 motor connector (male) PLUS Standard 1S lipo female connector This... |
$10.99
... more info
|
 |
3-pin connector that fits the motor connector on the AR6400/AR6400L brick Use this to hookup your brushless motor controller Includes 6" of 32 gauge... |
$4.79
Add:
|
 |
Use your existing JST-connected Lipos on your Umx planes! This is the familiar red JST-RCY female connector (male pins but female housing) wired to a... |
$5.99
Add:
|
 |
Use your MCP-X Lipos on your Mosquito, MCX, MCX-2, 4-Site or any other regular 1S lipo plane or heli This is the MCP female connector wired to ONE 1S... |
$4.99
... more info
|
 |
2-pin connector that IS THE SAME AS the motor connector on the Vapor brick, or just 2 pins of the AR6400/AR6400L motor connector Use this as part of... |
$2.09
Add:
|
 |
2-pin connector that fits the motor connector on the AR6400/AR6400L/Vapor brick Use this is you'd like to hookup your own brushed motor to your... |
$1.49
Add:
|
 |
3-pin connector that IS THE SAME AS the motor connector on the AR6400/AR6400L brick Use this as part of a 3-pin motor extension, or to replace the... |
$2.99
Add:
|
 |
3-pin connector that fits the motor connector on the AR6400/AR6400L brick Use this to hookup to all three pins of the motor connector No wires! |
$2.09
Add:
|
 |
2-pin Motor extension for your Vapor/mini-vapor/AR6400 based brick, anything with a little 2-or-3-pin round socket connector (.05" on center) 30... |
$4.99
... more info
|
 |
3 pin connector kit for the new AR6400 and AR6400L brick (the AR6400 is inside the new Parkzone SU-26 Sukhoi) Also used on a Parkzone... |
$1.19
Add:
|
 |
3 pin connector for the new AR6400 and AR6400L brick (the AR6400 is inside the new Parkzone SU-26 Sukhoi) The term that's starting get used for these... |
$3.59
Add:
|
 |
4 pin connector kit for the new AR6400 and AR6400L brick (also inside the new Parkzone SU-26 Sukhoi) Also used on a Parkzone Green-Dot-Vapor-Brick,... |
$1.19
Add:
|
 |
4 pin connector for the Parkzone/Horizon AR6400 and AR6400L brick Also used on a Parkzone Green-Dot-Vapor-Brick with the 4-pin X-Port connector added... |
$3.59
Add:
|
 |
Nano JST Female Connector 3 pins Flat - lays flat on the board. Surface-mount pins - solder very fine wires to make an extension Or for some custom... |
$1.19
Add:
|
 |
Nano JST Female Connector w/wires 3 pins 6" of 32-gauge twisted wires attached - Futaba colors Use for making a Nano-JST extension or converter cable |
$4.79
Add:
|
 |
Nano JST Female Connector 3 pins Right Angle - sits upright on the board. Surface-mount pins - use this connector to put a servo connector on your... |
$1.19
Add:
|
 |
Nano JST Female Connector 4 pins Flat - would lay down flat on the board Surface-mount pins - use this connector to make your own JST-SH female cable... |
$1.19
Add:
|
 |
Nano JST Female Connector 4 pins Right Angle - sits upright on the board. Surface-mount pins - use this connector to put a 4-pin X-Port connector on... |
$1.19
Add:
|
 |
Servo-connector converter Male Nano-JST connector on one side, female Micro-JST on the other, APPROXIMATELY 1" to 1.25" long Use these to plug a... |
$6.59
... more info
|
 |
2-pin male kit Includes male plastic housing and 3 pins, one for practice These are what are on the... |
$1.19
Add:
|
 |
2-pin male with wires Comes with 6" of 28 gauge wires These are what are on the Vapor/Citabria/Cessna/MCX/Ember/Sukhoi/Micro-4Site stock batteries... |
$2.29
Add:
|
 |
2-pin male with wires Comes with 6" of 30 gauge wires These are what are on the Vapor/Citabria/Cessna/MCX/Ember/Sukhoi/Micro-4Site stock batteries A... |
$2.29
Add:
|
 |
VRX Charger/Brick side of a Parkzone single-cell lipo setup... Used on Vapor/Citabria/Cessna/MCX/AR6400/Sukhoi/Micro-4Site brick or the single-cell... |
$1.19
Add:
|
 |
VRX-28-6 Charger/Brick side of a Parkzone single-cell lipo setup, with 6" of 28 gauge wires Used on... |
$2.59
Add:
|
 |
VRX-30-6 Charger/Brick side of a Parkzone single-cell lipo setup, with 6" of 30 gauge wires Used on... |
$2.59
Add:
|
 |
Nano-JST extension JST-SH connectors (1.00mm pitch) on both ends (one male, one female) SELECT YOUR LENGTH BELOW, length is between connectors |
$6.59
... more info
|
 |
Nano-JST extension, for a 4 pin connector. JST-SH series, 1.0mm pitch 30-gauge wire with Male & Female ends. Random wire colors - our choice. This is... |
$7.99
... more info
|
